Arnold Polished Concrete Flooring (NG5): Previously seen only in commercial spaces, cellars and garages in Arnold, polished concrete floors are now putting in a long overdue appearance in residential properties throughout the area. As a consequence of modern advances, by which its aesthetic appeal has been heightened by colouring and sealing methods, polished concrete can now contend with marble, slate and granite flooring, which were formerly the more popular choices. Subsequently, polished concrete affords a host of benefits and solutions for home renovation specialists and builders.
Sustainability is one of the notable benefits of polished concrete in these times of environmental concern. Although you might not initially think so, sealed and polished concrete has a relatively low impact on the environment in comparison to some other flooring methods. Mostly, no additional flooring materials will be needed, since the existing base of concrete (when one exists) can merely be sanded, sealed and polished, saving time and cash. There are also very few chemical vapours given off by the products used in polished concrete floors, and so the interior air quality and the exterior environment isn't damaged by the process. The compounds and substances used in polishing and sealing concrete flooring do not have any permanent smells.
Concrete floors also offer excellent value for money. Concrete has been the most affordable flooring alternative available for a long time. More often than not the main flooring foundation is already in place, since lots of houses in Arnold are literally built on large lumps of concrete. Things like timber, carpets, vinyl and tile will have merely been installed on top of the concrete base. With a perfectly good floor surface that only needs to be treated, little else could be achieved at less cost. The need for expensive air-conditioning will also be lowered as polished concrete floors remain even on the warmest of days. Also, the reflective surface of a polished concrete floor helps in reducing a property's interior lighting expenditure.
A considerable plus side to polished concrete flooring is that it's very easy to clean and maintain. Thorough cleaning is a necessity with most traditional floor coverings. For example carpets must be regularly vacuumed, marble flooring is prone to scuffing and needs special chemical cleansing agents and hardwood floor boards need waxing and polishing. Since it is highly resistant to scratching and discoloration, a polished concrete floor merely needs a quick mopping now and again. Along with the additional practicalities and convenience of this characteristic, time and effort can also be saved.
There's no doubt that one of the key advantages of concrete flooring is the durability aspect. It is a fact that some of the toughest floors in Arnold homes are built from treated concrete. The likely lifespan of a properly treated concrete floor is approximately 100 years or more. This sort of floor surface has for a long time been employed for high traffic locations in Arnold like retail outlets, offices, gyms, commercial spaces, bars and shopping centres, for this reason. There are hardly ever any issues with moisture damage and rotting because a concrete floor can literally "breathe". Expensive repairs and replacements can occur owing to trapped moisture with some other forms of flooring like vinyl or tiles.
Whilst it may not initially seem apparent, concrete floors also have health benefits. Dust mites and dust have for many years been known to contribute to allergies, breathing problems and other medical issues. The deep pile of carpets and the cutouts and joints of tiles and wooden floorboards are prime breeding grounds for microbes, germs and pests. Given that the finished surface of polished concrete is seamless and smooth, there's nowhere for these harmful things to accumulate. You should certainly give some thought to polished concrete floors if you're wanting to establish an environment that is "allergy-free".
Since concrete is such an accommodating material, it offers Arnold home owners an array of possibilities and options. The a variety of stains and treatments that are on the market mean that you can accomplish pretty much any look that you'd like. As an example, property owners who would like the ubiquitous "wet" look, can obtain this with the use of surface penetrating silicon based sealers. A favourite design for concrete flooring is the faux tile appearance, making it look like a tiled floor. Concrete can be imprinted with a floor board design if it is a timber plank effect which is desired. A mind-blowing result is accomplished by exposing a cross section of the aggregate stones by means of diamond grinding.
Waterproofing a Concrete Floor
While concrete floors are known for their durability and strength, they can still be impacted by water damage if they are not sealed. Mould growth or structural damage caused by water penetration can be avoided by carrying out concrete floor waterproofing, an essential process.
The use of sealants, membranes and coatings that create a barrier between water and concrete is one of the many waterproofing solutions offered by concrete flooring companies. They can also repair any cracks or damage in the surface of the concrete before applying the waterproofing treatment.
Waterproofing of concrete floors not just averts mould growth and water damage but also gives a matt or gloss finish to the surface, therefore enhancing the appearance of the floor. Some waterproofing treatments can also improve the slip resistance of the floor, making it safer for foot traffic. With the assistance of a professional concrete flooring company, householders can obtain expert recommendations on the ideal waterproofing options for their individual circumstances, promoting long-term preservation and enhancement of the floor's appearance.
Staining Concrete Floors
Staining a concrete floor is an affordable method to enhance the look and feel of a space. Concrete stains provide a vast range of colours to achieve a gleaming, enduring finish for your floors.
It's vital to clean and repair any cracks or damage on the concrete surface before commencing the staining process. To prevent unintentional staining, it is essential to shield the surrounding areas with tape or plastic sheeting.
Once the surface is ready, you can apply the stain with a sprayer or brush in smooth, uniform layers. Small sections are the way to go for a smooth and uniform result, blending each one into the next for consistency.
Once the stain has fully dried, it's recommended to apply a sealer for surface protection and to enhance the colour. With adequate care and upkeep, a stained concrete floor can offer a long-lasting and trendy surface for a good few years. Maintenance and cleaning are necessary for the upkeep of a stained concrete floor. This includes sweeping or vacuuming on a regular basis, wiping up spills promptly, and avoiding using harsh cleaning agents that can damage the surface.
Concrete Polishing Equipment Arnold
To apply a professional finish to polished concrete, specialist equipment is needed in conjuction with diamond based abrasives. As such, it's not a straightforward do-it-yourself activity and it is suggested that you hire a specialist concrete polishing company to undertake the work. However, if you're certain you want to have a go yourself, the following is a checklist of equipment that you will need;
Diamond Segmented Abrasives - You will require various levels of grit up to 3,000. A lower grade means a coarser grit, while the higher numbers are used for finer work. You will use the coarser (lower numbers) abrasives to eliminate any deep imperfections and gradually work up to the finer abrasives for polishing.
Concrete Filler - Before any polishing takes place you must repair any cracks and nicks, and level off the surface of the concrete as much as possible. If the surface is especially rough it might be required to spread a layer of screed to smooth it out.
Chemical Hardener - This is applied as soon as the initial grinding work. This chemical hardener soaks into the concrete and creates a better surface on which to do the final polishing.
Floor Polisher - The diamond abrasive disks are mounted on the polisher and are used to create the perfect surface on your concrete floor. A larger sized polishing machine can cover more areas quicker, but it may have difficulties in narrow spaces and tight corners. (Tags: Concrete Polishing Machines Arnold, Concrete Polishing Machinery Arnold, Concrete Polishers Arnold, Concrete Polishing Equipment Arnold)
Granolithic Concrete Arnold
The type of flooring that is often called granolithic concrete is made up of a combination of concrete and a gritty aggregate compound. The aggregate element may comprise of marble chippings, granite or some comparable hard rock, giving it a robust consistency. This provides a far more visually attractive finish in comparison to traditional concrete, and can be polished to a shiny, smooth finish and given a final sealing coat to achieve the dense and strong surface.
This is just the ticket for factory floors, industrial settings and pavements in Arnold, where the flooring is liable to experience high amounts of usage and stress. The pouring and finishing of granolithic screed requires a high level of skill so as to avoid the kind of cracking and "curling" that can occur.
Local Arnold concrete polishers will usually be able to help you out with concrete repairs, concreting quotes in Arnold, concrete overlays, warehouse floors, diamond grinding, cheap polished concrete, dry shake toppings, restaurant floors in Arnold, concrete slab flooring in Arnold, concrete floor waterproofing, polished concrete flooring for schools, anti-static flooring, microcement walls in Arnold, bar floors, gloss concrete flooring, gym floors in Arnold, roof screed, microcement flooring, microcement bathrooms, polished concrete, diamond polishing, polished concrete flooring, shop floors Arnold, textured concrete flooring, cement flooring in Arnold, polished concrete for bathrooms, power floating, polished concrete for kitchens, polished concrete patios, concrete floors Arnold, and lots of other concrete related tasks in Arnold. Local Arnold concrete polishers will most likely have the postcode NG5 and the telephone code 0115. Listed are just a few of the activities that are accomplished by those installing polished concrete. Arnold professionals will be happy to tell you about their whole range of concrete flooring services.
Polished Concrete Near Me
Also find: Lambley concrete flooring, Colwick concrete flooring, Rise Park concrete flooring, Sherwood concrete flooring, Woodthorpe concrete flooring, Daybrook concrete flooring, Mapperley concrete flooring, Stoke Bardolph concrete flooring, Old Basford concrete flooring, Bestwood concrete flooring, Gedling polished concrete and more. Most of these locations are serviced by companies who do polished concrete. Arnold home and property owners can get polished concrete estimates by clicking here.
More Arnold Flooring Services
Undoubtedly, whenever you happen to be doing concrete flooring in Arnold, Nottinghamshire, you'll likely need some other services and along with a concreting specialist in Arnold, Nottinghamshire, you could also need natural stone paving in Arnold, wooden decking in Arnold, underfloor heating in Arnold, driveways in Arnold, carpet fitters in Arnold, floorers in Arnold, concrete driveways in Arnold, screeders in Arnold, slab paving in Arnold, concrete paving in Arnold, tilers in Arnold, SKIP HIRE in Arnold, rubber flooring in Arnold, and other different Arnold flooring specialists.
TOP - Polished Concrete Arnold
Concrete Flooring Arnold - Concrete Contractors Arnold - Polished Concrete Flooring Arnold - Cheap Polished Concrete Arnold - Concrete Floor Polishing Arnold - Concrete Specialists Arnold - Concrete Floors Arnold - Concrete Finishing Arnold - Resin Flooring Arnold